- Climbing pet constant temperature heating padSherline 2.2mm (.0866) WW Collet

• Sherline 2.2mm (.0866) WW Collet
• Ensures high centering accuracy for lathing
• Fits standard WW collets with a .275-40 thread
• Accommodates stock up to 3/16" or 4.5mm diameter
• Boasts a maximum runout of .002" or less
• Offers sizes from .3 mm to 8.0 mm in .1 mm increments

The Sherline 2.2mm (.0866) WW Collet offers a precise and efficient method for mounting cylindrical parts or bar stock in a lathe, ensuring high centering accuracy. This collet functions as a small, precision 3-jaw chuck that fits into a specially designed tapered adapter within the headstock. The drawbar, threading through the headstock and into the collet's backside, pulls the collet into the adapter, causing the jaws to close and securely grip the part to be machined.

WW collets are distinct from milling collets due to their through-hole design, allowing stock to pass entirely through. The maximum diameter stock that can pass through is 3/16" or 4.5mm. Collets larger than this diameter are referred to as "pot" chucks and are not bored through, being only .260" deep. The collet's accuracy is notable, with a maximum runout of .002" or less, provided the WW collet adapter is trued as per instructions.

Sherline collets are logically numbered, with metric collets beginning with part number 1178 followed by two digits indicating the size in 0.1 mm increments. These collets are manufactured to standard WW specifications, with a shank diameter of .312-.313 and a .275-40 thread. It is important to verify compatibility with other manufacturers' WW collets to ensure they fit the Sherline adapter. Sherline also offers a slightly larger adapter and drawbar set to accommodate some other brands of 8 mm collets.