- ​​Christmas pet Christmas clothingP8-ST Micro Stepper Actuator 75mm Stroke 165:1 Gearing

Title Default Title
Qty:

Description

  • P8-ST Micro Stepper Actuator 75mm Stroke 165:1 Gearing
  • Incorporates brushless stepper for long lifespan
  • Maintains position with no power
  • Features low noise below 40 dB
  • Supports high static load up to 200N
  • Operates over temperatures from -10°C to +40°C

The P8-ST Micro Stepper Actuator 75mm Stroke 165:1 Gearing is a comprehensive linear motion device engineered to axially push or pull a load along its entire stroke length. It incorporates a brushless stepper design, contributing to its extended operational lifespan. The actuator's travel speed is governed by the step frequency, while the maximum force is determined by the current applied. Upon power removal, the actuator maintains its position unless the applied load surpasses the back drive force.

  • 1x P8-ST Micro Stepper Actuator 75mm Stroke 165:1 Gearing
  • 2x Mounting bracket
  • 1x M3 Mounting hardware
  • Stroke: 75mm
  • Closed length (hole to hole): 110 mm
  • Mass: 28g

PDF File

  • Gear Ratio: 165:1
  • Full Step Size: Approximately 0.0018mm
  • Backdrive Force: 25N without power, over 100N with power
  • Maximum Temperature Rise: 80°C
  • Input Voltage: 0.4-2 VDC
  • Maximum Current per Phase: 256mA
  • Operating Temperature Range: -10°C to +40°C
  • Audible Noise: Less than 40 dB at 45cm with low noise settings
  • Ingress Protection Rating: IP-54
  • Mechanical Backlash: Less than 0.5mm
  • Inductance per Phase: 4.5mH at 1kHz
  • Resistance per Phase: 15 ohms
  • Maximum Duty Cycle: 100%
  • Maximum Static Load: 200N